8 Web Interface
72
HARS series
8-4 Config Page
Click the Config button to configure LAN communication information.
Setting item
Description
TCP/IP Mode
Selects “DHCP”.
When “DHCP” is set to ON, the unit usually uses DHCP for
communications by detecting the DHCP server.
Manual IP Address
Subnet Mask
Default Gateway
Set each IP address in TCP/IP mode.
When setting up, enter a period as well.
After changing settings, click [Apply] button.
Regarding "TCP/IP Mode", "Manual IP Address", "Subnet Mask", and "Default Gateway" changes will not
be reflected immediately even clicking the [Apply] button.
Click the Apply button to restart the unit.
Clicking the Cancel button will discard the changes. (It is available only before clicking the [Apply] button.)
Summary of Contents for HARS Series
