Single Phase EV Charger Protection unit
16 |
P a g e
Specifications
Description
Electric Vehicle Charger Protection Unit
Input (Volts)
Nominal input voltage 230v, 50Hz
Max Load
32A - All units
Dimensions
SP - 182mm x 169mm x 96 (111)mm
IP - 300mm x 200(251)mm x 129(135)mm
Weight
Approximately 2.5 kg
Operating Temp
-5°C to 40°C
Storage Temp
-5°C to 40°C
Enclosure
SP - Mild Steel Zintec Powder Coated
IP - ABS-HB Flame Retardant plastic
Power Consumption
13VA
Ingress Protection
SP-EVCP = IP2X
IP-EVCP = IP65
Document Revision
V1.5 Aug 2020
Terminal Capacities
Min
Max
Torque
Incoming Terminals cable size &
tightening torque
0.5 mm
2
6.0mm
2
1.3Nm
Incoming RCBO cable size &
tightening torque
2.5 mm
2
25.0mm
2
2Nm
Outgoing Contactor cable size &
tightening torque
2.5 mm
2
10,0mm
2
2.3Nm
WARNING: This equipment is compliant with Class A of EN55032.
In a residential environment this equipment may cause radio interference.
Warranty
The SP-EVCP units are guaranteed for a period of 3 years from the date of manufacture.
This warranty is limited to the replacement of faulty components only.
t: 01543 227290 e: info@matt-e.co.uk w:
www.matt-e.co.uk
matt:e Ltd, Unit 5, Common Barn Farm, Tamworth Road, Lichfield WS14 9PX
