!
2.01
TI013G0008
To operate the machine under any
operating condition, including
maintenance, it is not necessary
that more than one person be present.
The employer should instruct the
staff on the risks of accidents, on
safety devices and on the general
rules concerning prevention and protection,
as established by the European Community
Directives and by the current legislation in
the country where the machine is installed.
The operator should be aware of the
location and operation of all controls and
of all the machine features.
The operator should also have read the
entire manual.
Only skilled engineers should carry out
maintenance jobs, after having duly prepared
the machine..
Any unauthorized tampering or
replacement of one or more parts
of the machine, or the adoption of
accessories that modify the use
of the machine and the use of different
materials than those recommended in
this manual, may be a potential risk of
accidents.
It is strictly forbidden for the machine to
be operated by two persons at the same
time, one inside the guards and one on
the control panel.
Dangers and residual risks
During the design phase all hazardous
have been considered and, therefore, all
necessary precautions have been taken
to avoid risks to people and damage to the
machine components.
To guarantee both health and safety of
those exposed, the machine is equipped
with appropriate safety devices:
EMERGENCY push-button to
immediately stop the machine and
STOP devices on the push-button
panel of the control device.
Fixed guards: These are mounted in
areas for exclusive access for standard
maintenance. They are fixed with
systems that require specic tools to
remove them or have been screwed in.
Protection and segregation of the
electrical/electronic equipment of the
machine with a metallic container
to avoid accidental contact with the
equipment under voltage in the event
that the metallic container is open;
protection of the electrical cabin: IP
64; protection of inner equipment IP 20
against accidental contact.
Adequate panels or protections to cover
moving elements.
Electrical devices to detect supply failures
of the machine and the malfunction of
electrical devices of motors.
WARNING!!!
Our machine IS NOT SUITABLE
for use in areas with potentially
explosive atmosphere.
After having carefully considered all
possible risks concerning the use and
maintenance of the machine, the solutions
necessary to remove the risks and limits
the dangers to those exposed have been
adopted.
Although the machine is equipped with
safety devices, the following residual risks
remain:
• Risk of bruises, tearing, cuts during the
handling of tools and/or elements.
• Risk of bruises during machine
intervention.
They can be eliminated or reduced by the
relevant precaution.
Operation
The operator should use the personal
protection devices.
Use the compressor only for the kind of
General information - Safety
