Page 23
Everything is stored by pressing the button
e
e
e
e
and changes are discarded with the
button
<
<
<
<
or
c.
c.
c.
c.
If anything was changed you have to confirm your entry again by
pressing the
e
e
e
e
button after the query “
Save?
” is displayed. However if the changes
shall be discarded you have to press the
c
c
c
c
button.
3.4 Programming of the relay switching programs
After unlocking the keyboard, navigate to Menu “
4 Programming
” using the arrow-
or number-buttons as described in chapter Fehler! Verweisquelle konnte nicht
gefunden werden..
Display:
4 Programming
>
In this menu the holidays, period assignments and dayplans can be programmed.
Also the serial interface can be configured here.
3.4.1 Programming Holidays
After unlocking the keyboard, navigate to Menu “
4 Programming
” and then “
41
Holidays
” using the arrow- or number-buttons as described in chapter Fehler!
Verweisquelle konnte nicht gefunden werden..
After entering the submenu with the button
>
>
>
>
the first fixed holiday of the year is
displayed.
Display:
01 fi T03 01.01.----
MDMDFSS
01
holiday number
fi
fixed holiday (see table below)
au
automatic calculated (moveable) holidays
(see table below)
ma
manual (user-defined) holidays
T03
Dayplan for the holiday
01.01.----
day/month/year of the holiday,
„
----
„ means the entry is valid every year,
for manual holidays there is a second date in
the second line, which can be used to define
holiday periods (e.g. summer break)
MDMDFSS
weekdays on which the dayplan is active