Page 31
3.5.3 Reset
After unlocking the keyboard, navigate to Menu “
5 Settings
” and then
“
53 Reset
” using the arrow- or number-buttons as described in chapter Fehler!
Verweisquelle konnte nicht gefunden werden..
Display:
53 Reset
>>
With the button
>
>
>
>
or
e
e
e
e
, the reset command is issued, which has to be confirmed by
pressing the
e
e
e
e
button after the query “
Apply?
” is displayed. However if it should be
cancelled you have to press the
c
c
c
c
button. The MPU-TC does a Software reset if the
query is acknowledged.
3.5.4 Factory Settings
After unlocking the keyboard, navigate to Menu “
5 Settings
” and then
“
54 Factory Settings
” using the arrow- or number-buttons as described in
chapter Fehler! Verweisquelle konnte nicht gefunden werden..
Display:
54 Factory Settings
>>
With the button
>
>
>
>
or
e
e
e
e
, the factory settings command is issued, which has to be
confirmed by pressing the
e
e
e
e
button after the query “
Apply?
” is displayed. However if
it should be cancelled you have to press the
c
c
c
c
button. The MPU-TC does reset all
settings done by the user to the default settings. All user-defined holiday, period
assignments and dayplans will be lost.
3.5.5 Relay Test
After unlocking the keyboard, navigate to Menu “
5 Settings
” and then
“
55 Relay Test
” using the arrow- or number-buttons as described in chapter
Fehler! Verweisquelle konnte nicht gefunden werden..
Display:
55 Relay Test
> All relays toggle!
After pressing the button
>
>
>
>
or
e
e
e
e
, and confirming this action with the
e
e
e
e
button after
the query “
Apply?
” is displayed, the relay test is started. However if it should be
cancelled you have to press the
c
c
c
c
button.
This function is typically used for maintenance and should not be activated in
normal operation, because all available relay switching channels are turned on
and off during this procedure. This can cause faulty behaviour of attached
systems, which could result in damaging those systems.
