Page 4
1 Installation and assembling
1.1 General Information
MPU-TC is a modular Master Clock and can be configured for industrial application
with up to 6 slave clock lines and up to 32 switching channels, using extension
modules. Specific to the configuration an extension enclosure is required.
The clock can be continuously synchronized using a DCF77 or GPS Antenna.
Daylight Saving Times are calculated automatically based on a user defined entry or
are defined by the DCF77 signal.
The slave clock lines outputs are polarised 24V impulses, the line type can be
defined separately for each line.
The switching channels can switch up to 230V AC signals.
Programming of the switching channels is done in multiple steps.
First the switching times of the switching channels on one day are defined in a
Dayplan. On one day only one Dayplan can be active.
The Dayplans then have to be assigned to a specific date or date period in which
they are active using the Period Assignment menu. Additionally the days of the
week in which they are active can be selected.
The Holidays menu enables the user to assign Dayplans to holidays or holiday
periods which overrule the Period Assignment Dayplan. The standard fixed and
moveable holidays are pre-programmed.
