MATTRESS FIRM 100 I/C-UBL, Owner'S Manual

100 I/C-UBL Adjustable Base Owners Manual 290-0029

12

reMote ControL PrograMMIng

Program Two Remotes to Operate One Base

 - Bases

are factory programmed to operate individual 
bases. To program two remotes to operate one 
base, perform the following numbered procedure. 

If programming fails, initiate the programming 

procedure a second time. 

steP 1

UNPLUG

 the base from the electrical power source 

(if plugged in) and wait 3 minutes.

steP 2
Plug the base into the electrical power source. 

You now have 3 minutes to complete the 
programming procedure. The programming indicator 
(under bed light) will flash to indicate programming 
mode.

steP 3
Simultaneously press and hold the 

head up 

and

foot up 

buttons on 

remote control 1

 for 2 seconds. 

Release both buttons and set remote control 1 aside 
without pressing any other button.

NOTE: If 

any

 button is pressed, remote control will 

exit pairing mode.

steP 4
Simultaneously press and hold the 

head up 

and

foot up 

buttons on

 remote control 2

 for 2 seconds. 

Release both buttons.

Press the

 head up

 or 

foot up 

button on 

remote 

control 2

 to verify base functions.

Wait 5 seconds and press the 

head up

 or 

foot up

button on

 remote control 1

 to verify base functions.

NOTE: There should be a 5 second wait time while 

switching between remote control 1 and remote 

control 2.

Two remote controls are now programmed to operate 
one base. 

steP 1

UNPLUG

 both bases from the electrical power 

source (if plugged in) and wait 3 minutes.

steP 2
Plug 

both

bases

 into the electrical power source. 

You now have 3 minutes to complete the 
programming procedure. The programming indicator 
(under bed light) will flash to indicate programming 
mode.

steP 3
Simultaneously press and hold the 

head up 

and

foot up 

buttons on 

remote control 1

 for 2 seconds. 

Release both buttons and set remote control 1 aside 
without pressing any other button.

NOTE: If 

any

 button is pressed, remote control will 

exit pairing mode.

steP 4
Simultaneously press and hold the 

head up 

and

foot up 

buttons on

 remote control 2

 for 2 seconds. 

Release both buttons.

Press the

 head up

 or 

foot up 

button on 

remote 

control 2

 to verify base functions.

Wait 5 seconds and press the 

head up

 or 

foot up

button on

 remote control 1

 to verify base functions.

NOTE: There should be a 5 second wait time while 

switching between remote control 1 and remote 

control 2.

Two remote controls are now programmed to operate 
two bases.

Program Two Remotes to Operate Two Bases

 - 

Bases are factory programmed to operate individual 
bases. To program two remotes to operate two 
bases, perform the following numbered procedure. 

If programming fails, initiate the programming 

procedure a second time. 

REMOTE 

CONTROL  1

REMOTE 

CONTROL  2

REMOTE 

CONTROL 1

REMOTE

CONTROL 2

BASE 1

BASE 2