MATTRESS FIRM 100 I/C-UBL, Owner'S Manual

100 I/C-UBL Adjustable Base Owners Manual 290-0029

13

steP 1

UNPLUG

 both bases from the electrical power 

source (if plugged in) and wait 3 minues.
steP 2
Plug 

base 1

 into the electrical power source. 

You now have 3 minutes to complete the 
programming procedure. The programming indicator 
(under bed light) will flash to indicate programming 
mode.
steP 3
Simultaneously press and hold the 

head up 

and

foot up 

buttons on 

remote control 1

 for 2 seconds. 

Release both buttons. 
Press the

 head up

 or 

foot up 

button on 

remote 

control 1

 to verify 

base 1

 functions.

steP 4
Plug 

base 2

 into the electrical power source.

You now have 3 minutes to complete the 
programming procedure. The programming indicator 
(under bed light) will flash to indicate programming 
mode.
steP 5
Simultaneously press and hold the 

head up 

and

foot up 

buttons on

 remote control 2

 for 2 seconds. 

Release both buttons.
Press the

 head up

 or 

foot up 

button on 

remote 

control 2

 to verify 

base 2

 functions.

Independent operation is now restored. Remote control 
1 operates base 1; remote control 2 operates base 2.

Reprogram Two Remote Controls for Individual 

Base Operation 

- Bases are factory programmed 

to operate individual bases. To reprogram bases 
synced to multiple remote controls, perform the 
following numbered procedure. Individual base 
operation will result. 

If programming fails, initiate 

the programming procedure a second time. 

REMOTE CONTROL  1

REMOTE CONTROL  2

BASE 1

BASE 2

reMote ControL PrograMMIng