7
Attaching the bed legs
Installation Guide
Take out the adjustable bed legs from the accessory box.
Thread the bed legs into the pre-drilled holes on the adjustable
bed by turning them in a clockwise direction.
Tighten the legs securely to the adjsutable bed.
Adjust the legs to the desired height by turning it either clockwise
or counterclockwise.
NOTES:
•
Do not overtighten the bed legs.
•
Make sure all legs are adjusted to the same height.
1
2
3
4
Setting up the electronics
FOR QUEEN, KING, AND CAL KING MODELS
Plug the cord for the foot lift into the control box. Insert it into the
port labeled "Foot Actuator" (with red & orange label).
Plug the cord for the foot massage into the control box. Insert it
into the port labeled "Foot Vibration" (with blue label).
1
2
FOR ALL MODELS
1
3
Remove and extend the power cord from the adjustable bed.
Rotate the adjustable bed over carefully so the top side is now
facing upward.
NOTE:
Do not rest the adjustable bed on its side. The weight may
damage the legs.
Plug the power cord into a working and grounded electrical outlet.
NOTE:
For optimal safety, using a surge protector (not included) is
highly recommended.
2
