Maverick MV150000, Instruction Manual

10

10

Problem

Cause

Remedy

The vehicle does not move 

Transmitter or receiver is off 

Turn on both the transmitter and 

receiver

Batteries are not placed correctly in 

the transmitter

Place batteries in the transmitter 

properly

The main battery is not charged 

enough

Charge the main battery

The vehicle does not follow your 

driving inputs

Transmitter or receiver is off 

Turn on both the transmitter and 

receiver

Transmitter reverse switches are set 

incorrectly

Check the reverse switch 

settings 

Transmitter End Point 

Adjustments (EPA) are set

incorrectly

Check that your EPA Dials on 

your transmitter.

Weak batteries in either the 

transmitter or the car

Replace batteries in the

transmitter and recharge the 

main battery.

The front and rear wheels rotate in 

opposing directions

Incorrect user differential 

placement 

Insert the differential the

correct way

Trouble Shooting

Please read this section if you have any fault trying to operate the vehicle

If you encounter any other fault whilst operating the vehicle please contact your local hobby shop or alternatively  
contact your local distributor.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operating 

instructions, may cause harmful interference to radio communications, however, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and in, the user is encouraged to try to correct the interference by one or more of the 

following measures:
● Reorie

nt or relocate the receiving antenna.

● Increase the separation between the equipment and the receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced technician for help.

This d

evice complies with Part 15 of the FCC Rules and with RSS-210 of lndustry Canada. Operation is subject to the following 

two conditions:
1)This d

evice may not cause harmful interference, and….

2)This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications made to this equipment not expressly approved by the party responsible for compliance may 

void the FCC authorization to operate this equipment.

RF Exposure Statement. The transmitter has been tested and meets the FCC RF exposure guidelines when used with the 

accessories supplied or designated for this product, and provided at least 20cm separation between the antenna the user\s body is 

maintained. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

CE Compliance statement

The ra

dio equipment type in this product is in compliance with EU Directive 2014/53/EU. The full text of the Declaration of Conformity is available 

at www.hpiracing.com/ce

Die Fernsteuerung in diesem Produkt ist in Übereinstimmung mit der EU Direktive 2014/53/EU. Die vollständige Konformitätserklärung ist erhältlich 

unter www.hpiracing.com/ce

La radiocommande dans ce produit satisfait aux directives CE 2014/53/EU. La déclaration de conformité complète est disponible sur www.

hpiracing.com/ce

La tipologia di apparecchiature radio in questo prodotto è

 conforme alla Direttiva 2014/53/EU. dell’Unione Europea. Il testo completo della 

Dichiarazione di Conformità 

è

 disponibile a sito: www.hpiracing.com/ce

FCC COMPLIANCE STATEMENT