W
indy31
Q
uick
I
nstallation
G
uide
Trouble Shooting
37
→ [Services] → [SharedAccess] → [Security]
Delete sub-key
“Security” in registry, and restart computer. It is
important to delete Security registry sub key, if any. descriptor at
the time of computer re-booting.
By doing this, Windows Firewall can be started through generic
security descriptor at the time of computer re-booting.
If Windows Firewall service is controlled by execution of Microsoft
COM (Component Object Model), DCOM or Microsoft COM+
application, following steps are to be taken.
1. [Start] → [Run] → type regedit in the current box and click ok.
2. Locate registry sub key and click.
[HKEY_LOCAL_MACHINE] → [SOFTWARE] → [Classes] →
[AppID] → {ce166e40-1e72-45b9-94c9-3b2050e8f180}
3. Click Export on File Menu.
4. Key in
‘C:\reg_AppID_CLSID.reg’into File Name box and press
Store to store registry file.
5. {ce166e40-1e72-45b9-94c9-3b2050e8f180} Delete registry sub
key.
6. Press Import on File Menu.
7. Key in
‘ C:\reg_AppID_CLSID.reg’into File Name box and
press Open.
8. Press OK and finish registry editor.
9. Start with Windows Firewall/Internet Connection Sharing (ICS)
service.
For this, key in
‘ NET START Shared Access’at command
prompt and press Enter key.
16. Windy31 Enabler does not stop.
It failed to store the change of IP address. Uninstall Windy31 and
check if there are any spywares or viruses.
1) If Windy31 Enabler remains running between 40 to 49.
The host computer may have network problems. Check if
there are any spywares or viruses. Restart computer and
reinstall Windy31.
2) If Windy31 Enabler remains running between 50 to 59.
W
ir
eless
B
roadband
R
outer
36
Trouble Shooting
15. Windy31 Enabler does not appear after Windy31 program is
installed.
1) Windy31 Enabler will not appear if there is firewall or WMI error.
Confirm if Windows Service Pack 2 has been properly installed.
1. [Start] → [Run] → type
“Winver”and make sure it is SP2.
2. [Control panel] → [Firewall] → all menus must be deactivated.
3. [Control panel] → [Program add/remove] → confirm SP2 is in
the list
4. [Internet Explorer] → [Tools] → [Internet Options] → [Privacy] →
uncheck
“Block Pop-ups”
If the problem persists, restart in safe mode and reinstall
Windows Service Pack 2.
Failed to start Windows Firewall/internet connection sharing
(ICS), or if you get the following message (shown below).
[Start] → [Run] → type
“cmd”and hit Enter.
Type the following command and press Enter.
“SC sdset SharedAccess”
D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCR
SDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTL
OCRRC;;;PU)
2) 1. [Start] → [Run] → type
“regedit”and click ok.
2. [HKEY_LOCAL_MACHINE] → [SYSTEM] → [CurrentControlSet]
윈디31 메뉴얼 (150qn) 4도 2008.9.11 2:0 PM 페이지36
