6
Turning on the power
7XUQRQWUDQVPLWWHU¿UVWDQGWKHQWXUQRQUH
ceiver.
Turn on the transmitter switc
KDQGWKH/('EDWWHU\
indicator will light up.
Turn on the receiver. The automatic set-up of the factory
set speed control should have been completed. If you
experience any problems with the speed control settings
refer to the Electronic Speed Control Section for correct
setup information.
7KH5HG/('ZLOOVKRZLIWKH
installed AA batteries have
VXI¿FLHQWFKDUJH
7KH5HG/('ZLOOÀDVKDQG
there will be an audible beep if
the batteries need replacing.
Power LED
You may need to setup your transmitter to ‘bind’ with the receiver if you change to a new receiver or for any reason
lose signal.
•
3ODFHWKHWUDQVPLWWHUDQGWKHUHFHLYHUFORVHWRHDFKRWKHUZLWKLQRQHPHWHU
•
Turn the power switch on the transmitter to the ON position.
•
Press and hold the receiver setup button, then turn the power switch to the ON position.
•
7KHUHFHLYHU/('ZLOOÀDVKTXLFNO\5HOHDVHWKHVHWXSEXWWRQDIWHUVHFRQG
•
3UHVVDQGKROGWKHELQGLQJEXWWRQRQWKHWUDQVPLWWHUIRUVHFRQGXQWLOWKH/('RQWKH
receiver is continuously lit.
Binding the Transmitter and Receiver
1
Turning off the power
7XUQRIIUHFHLYHU¿UVWDQGWKHQWXUQRIIWUDQVPLWWHU
,I\RXVZLWFKRIIWKHWUDQVPLWWHU¿UVWEHIRUHWKH5&FDU\RXPD\ORVHFRQWURORIWKH5&FDU
•
Turn off the receiver switch.
•
Turn off the transmitter switch.
•
'LVFRQQHFWWKHEDWWHU\FRQQHFWRUIURPWKHVSHHGFRQWUROFRQQHFWRU
