Seite 15 von 19
DOK-ID: OTX01G02, BE #5100062
3.
Installation and Use
3.1. User Environment
During the use of this product, the room temperature and humidity should remain in a range for
normal working and living conditions.
3.2. Installation, Connection methods, Connections
The MAVIG product/ system must be set up correctly in accordance with the assembly instruction
enclosed to the product/ system. Failure to follow the instruction can cause the system to be
unstable and/or mean that its function is reduced.
The precise installation is explained in document POR03Oxx
3.3. Cleaning, Disinfection, Sterilization
3.3.1. Cleaning
For wiping all surfaces:
Use soft, particle-free and free of residues of other cleaning agents cloths for cleaning.
Only slightly moisten the cloth. If necessary, use a mild soap solution or commercial
washing-up liquid.
Make sure that no liquid is spilled during cleaning and penetrates the device.
Then rub dry the surfaces with a cloth.
CAUTION
Damage to the product
In oder to avoid damage to the product no aggressive, abrasive, caustic,
bleaching, akaline, acidic or corrosive agents should be used (e.g. solvents,
acetates, scouring agents, chlorine etc.).
Only valid for OT54xx sowie OT94xx: Cleaning of
ComforTex®
HPMF Curtain
The following markings apply to the X-Ray protection curtain/strips:
Fresh stains can usually be removed from the radiation protective clothing with soapy water of
approx. 20°C and a soft cloth. For stubborn stains, we recommend a 10% solution of sodium
thiosulphate in water. For fluids containing proteins (such as blood), use cold water. Please make
sure that the cloth is damp and not wet
.
