background image

Serial N°: 

 

WARRANTY FORM 

 

VERY IMPORTANT 

Please complete this form and fax a copy to Max Power with a copy of the installation invoice or 

the invoice of the yacht/boat in order for the warranty to come into effect. 

 

To Be Completed by Owner: 

Name of Owner:……………………………. 

Contact No. :……………………….………….  

Address: …………………………………….. 

E-mail: ………………………………………… 

Country:……………Postcode: ……………. 

 

Name of Skipper:…………………………… 

Contact No. :………………………………….. 

Signature of Owner: ………………………... 

Date: ………………………………………….. 

 

To Be Completed by Installer: 

 

Installation Details: 

 

Thruster Model :…………………………… 

Electric/Hydraulic :……………………………. 

Date of Installation :……………………….. 

Date of Launching Boat : ……………………... 

Type and model of Boat : …………………. 

Builder:…………………    Build Year: ……… 

Pleasure or Commercial craft?:……………. 

Sail or Motor: ………….    Rig:……………….     

Navigates at Sea or River or Canals?………        Hull construction material :…………………….   
L.O.A. :………………L.W.L. :……………           Beam :………………… Free Board:………….. 

Displacement Weight at Full Load: :……… 

Height & Length of Superstructure:……………  

Tunnel Diameter, Thickness, Material & Length:  …………………………………………………. 

If Electric, Battery Type, Size & Number: …………………………………………………………… 

 

Installation Checks: 

 

 

 

 

 

 

 

Before Operating Thruster                  While Operating 

Thruster 

Electrical:  Voltage at Batteries 

 

…………………………..      …………………………. 

 

Voltage at Thruster Motor 

…………………………..   ………………………… 

 

Charge at Alternator in Amps  ………………………………………………………… 

 

Ampere in Motor Power Circuit  ………………………………………………………... 

Mechanical:  Verify if drive coupling between motor and drive leg is correctly tightened:..Yes / No 

 

    Verify if all cable connections is sufficiently tightened:……………...………...Yes / No  

 

    If hydraulic verify all hydraulic connections: ………………………………......Yes / No 

 

Thruster installation tested and working correctly: ………………………………………….Yes / No 
 

Important: Refer to installation manual for full installation details. 

 

 

Name of Installer: ………………………….    Signature:.……………………….

     

 

 

 

TO GAIN YOUR EXTRA WARRANTY COVERAGE 

 

                                                                                                                                                                                                                   

Manual Max Power Series 125HYD

Last Update: December 2016

19

Please, return by fax: +39 039 2004 299

Summary of Contents for 125 HYD Series





















Reviews: