6
AUTO RHYTHM
Rhythm selection
This Keyboard provides 255 rhythms (
“000” to “254”) for your selection. The rhythm is defaulted to be “000”. Press [Rhythm],
“rhy” will show on the display. Press the number buttons or the “+”/“-” buttons to select other rhythms.
Rhythm control
1. Rhythm enabling
Press [start/stop] to start accomp rhythm.
While in
enable state, Press [Sync], “Syn” will show on the Display. Play any key in the chord key zone (the 1st-19th key, from
left) and the accomp rhythm will be activated.
2. Interlude
After the accomp rhythm is activated, press [FILL-IN] to have a temporary rhythm play during the accomp rhythm.
3. Stop rhythm
During the accomp rhythm, press [Start/Stop] the stop the accomp rhythm.
Tempo adjustment
Press [Tempo +] or [Tempo -] to increase or decrease the tempo. Pressing the two buttons simultaneously may reset to the
default value tempo/min.
EFFECT CONTROL
Sustain function
Press [Sustain], “SUS” will show on the display. The sustain effect will be activated. Press this button again, “SUS” will
disappear from the display. The sustain effect will be disenabled.
Vibrato function
Press the [Vibrato] button, “Vib” will show on the display. The vibrato effect will be activated. Press this button again, “Vib” will
disappear from the display. The vibrato effect will be disenabled.
RECORDING AND RHYTHM PROGRAMMING
Recording
Press [REC
] to enable the recording function, “rEC” will show on the display. In this mode all played notes will be recorded.
When storage is full,
“FUL” will show on the display and recording will stop automatically. Press [Play] to playback the recorded
notes,
“PLy” will show on the screen. On completion of playback, “rEC” will show on the display. You can record a new rhythm,
or you can press [Play] to playback the recorded rhythm. Press [START/STOP] or press [REC] again to disenable the recording
function .All recorded rhythm will be removed.
Rhythm programming
Press [PROG
] to enable the rhythm programming function, “Prg” will show on the screen and the keyboard percussion will be
activated. In this mode, you can create custom rhythms by playing the corresponding percussion key. 32 percussions can be
recorded at maximum, after that “FUL” will show on the display and programming will stop automatically. Press [PLAY] to
playback the programming rhythm. Press [START/STOP] or press [PROG] again to disenable the programming function. All
recorded rhythm will be removed.
