49
GB
Main components
1. Self-tightening drill chuck
2. Torque selector (18 sdrilling)
3. Gear selector
4. Direction selector
5. Handle
6. Battery
7. Release button
8. On/off button (variable)
9. LED work light
Charging and � tting the battery
Charge the battery fully before using the drill
for the � rst time.
Press the release button (7) on the battery (6)
and take the battery out.
Insert the plug from the charger into the
charging socket on the battery. Plug the
charger in. The LED on the battery will light
up red while the battery is charging. Once
the LED turns green, the battery is fully
charged. Charging takes approx. 1 hour.
Disconnect the charger from the mains once
the battery is charged and insert it into the
drill.
Make sure the release button engages so
that the battery is � rmly in place.
1
2
3
4
5
6
7
8
9
