10
Start-up
5.2
s
et
Date
anD
tIme
If batteries are inserted or replaced, the date and time is
automatically requested after a brief display of the firm-
ware version number:
• Set the year, month, day, hour and minute with the hand-
wheel and confirm with the Boost button. The motor
moves the control pin backwards during the setting of
date and time.
• If "InS" and the rotating activity symbol "
" are displayed,
the motor still reverses. When only "InS" is shown in the dis-
play, the radiator thermostat can be installed on the valve.
The MAX! Radiator The can be configured already
before installation. Press the auto/menu button for this,
while „INS“ is shown in the display (see sec. „10 Configura-
tion menu“ on page 26). After the programming has been
completed, „InS“ is shown again in the display and instal-
lation can take place.
5.3
I
nstallatIon
on
the
raDIator
The MAX! Radiator The is easy to install and can
be done without draining heating water or intervening in the
heating system. No special tools are required, nor does the
heating have to be switched off.
The union nut attached to the radiator thermostat can be
used universally and without accessories for all valves with
a thread size of M30 x 1.5 from the most popular manufac-