7
2. SPECIFICATIONS AND TECHNICAL DATA
2. TOOL SPECIFICATIONS
HEIGHT
249 mm (9-7/8©)
WIDTH
106 mm (4-3/16©)
LENGTH
217 mm (8-1/2©)
WEIGHT
1.2 kg (2.6 lbs.)
RECOMMENDED
60 to 120 p.s.i. (4 to 8 bar)
OPERATING PRESSURE
LOADING CAPACITY
200 Nails
AIR CONSUMPTION
0.5Rat 90 p.s.i. (6 bar)
i
y
o
u
w
q
r
e
t
q Frame
w Cylinder Cap
e Contact Arm
r Nose
t Magazine
y Trigger
u Grip
i Exhaust
o Trigger Lock Dial
3. FASTENER SPECIFICATIONS
NAIL LENGTH
PLASTIC SHEET COLLATED
17 to 38 mm (11/16© to 1-1/2©)
SHANK DIAMETER
φ 1 . 4 7 t o φ 2 . 0 m m ( . 0 5 7 © t o
.079©)
SHANK TYPE
Smooth, Ring, Screw
TOOL AIR FITTINGS:
This tool uses a 6 mm (1/4©) N.P.T. male plug. The inside diameter should be 7 mm (.28©) or larger. The fitting must be capable of
discharging tool air pressure when disconnected from the air supply.
RECOMMENDED OPERATING PRESSURE:
60 to 120 p.s.i. (4 to 8 bar). Select the operating air pressure within this range for best fastener performance.
DO NOT EXCEED 120 p.s.i. (8 bar).
4. TECHNICAL DATA
q NOISE
A-weighted single-event ------ LWA, 1s, d 88.7 dB
sound power level
A-weighted single-event ------ L p A , 1s, d 81.1 dB
emission sound pressure
level at work station
These values are determined and documented in accordance to EN12549 : 1999.
w VIBRATION
Vibration characteristic value 3.09 m/s
2
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system when using the
tool. An influence to the hand-arm-system when using the tool will for example depend on the gripping force, the contact
pressure force, the working direction, the adjustment of mains supply, the workpiece, the workpiece support.
5. APPLICATIONS
General constuction works
Furniture assembly including drawer assembly, case back nailing
Cabinet assembly
Interior and exterior triming
Flooring
