background image

 

- 3 -

 

 

 

CAUTION

 

 

The data stored in the internal memory or the memory card cannot be stored per-

manently. We will not be responsible for damages and lost profits caused by loss of 
data attributed to battery consumption, trouble, repair, and so on. 

 Use the memory card only for ER-2200PC. Storing other data in the memory card 

may cause damage to the data. 

 Do not remove the memory card while exporting time data to it. 

Removal could cause damage to the data in the memory card. 

 Format the memory card by Windows 98, Me, NT or 2000.   

Do not format the memory card by Windows XP.   
If you format the memory card by Windows 2000, be sure to choose “FAT” as 
the ”File sytem”. 

 

Never disassemble or modify this instrument. It could cause a fire, electric shock, or 
trouble. 

 

 Do not insert foreign substances such as finger, pen, wire, paper into this instru-

ment. It could damage the instrument or cause a fire. 

 Operate the instrument only on a correct supply voltage. Otherwise, it could trouble 

the instrument. 

 Do not splash water or chemicals on the instrument. If water gets inside the instru-

ment, disconnect the power plug immediately from the plug socket and contact your 
dealer/distributor for a repair. It could damage the instrument or cause a fire or elec-
tric shock. 

 Do not put paper or cloth on the instrument. It could cause a fire. 

 Do not place any heavy material on power cord. It could cause a damage and a fire. 

 

 

 Never touch metallic part of the instrument. 

 Never touch the printer head. It is very hot just after printing and you could get 

burned. Also stain of your hand could cause a trouble to the printer head. 

 

 When the instrument is not going to be operated for a long time period, be sure to 

disconnect the power cord from the power socket for your safety. 

 When disconnecting the power cord, be sure to hold the power plug. Do not pull on 

power cord, or the cord could be broken and cause a fire or electric shock.

 

 

 

ACCESSORIES 

This instrument comes with the following accessories. Confirm them before use. 

1. Instruction manual 

2. “Key-Card” 

 :1 booklet:  

 : 10-pcs. 

3.  Screws for wall mounting   

 : 4-pcs. 

 

Summary of Contents for ER-2200PC


























Reviews: