10
Usage
1. Install the filter bag on the air tube (3). It must be parallel to a rectangular
part of the air tube. The filter bag is installed in two steps:
i.
Put the filter bag on the rectangular part of the air tube so that the bottom
and top edges located on the long outside part of the air tube, are inside the
bag.
ii.
Carefully insert the locking plate. The filter should be inside of it. The
locking plate must be inserted inside a rectangular part of the air tube until it
locks.
2. Before switching on the fan make sure that there are no foreign objects
between the blades.
3. Connect the device plug (4) to the 220V electrical network. To turn on and
off, use the switch (6) located on the device top cover (1). To adjust the
suction power, use the speed control (5) located next to the power button
(6).
4. Work in the area of the dust collector fan impeller at a distance of
approximately 1.5 cm from the grill edge to the center.
Safety measures
•
Do not allow hands or foreign matter entering into the moving blades of the
fan.
•
When you need to switch the dust collector off, pull the plug, not the
electrical cord.
•
Do not use it with wet towels and water.
•
Do not use the cable as a handle for carrying.
•
Disconnect the dust collector from the outlet during every bag handling
operation.
Care
Keep the dust collector body clean. Regularly remove dust from the blades and
the base of the fan impeller using a soft brush or compressed air. Do not use
solvent or other aggressive liquids (e.g. lacquer removal liquid) to clean the
device.
The dust collector includes a multi-layer filter bag for collecting dust. Its purity
determines the efficiency of the device. Clean dry bag must be used for the dust
collector to provide correct functioning.
Change the filter bag for a clean one before starting the working day. Wash
the bag to clean it from dust. Manual or delicate machine washing with water
temperature of not more than 40 degrees is permitted. During active operation it
is recommended to change the filter-bag at least once a day. Service life of bag
is 1.5-2 months.
ENG
Summary of Contents for Ultimate VII
