i-32V5
Air/Water heat pumps wih axial fans
18
1. Remove the cover
2. Uscrew the screws (number 2; 3; 4) of the sheet metal cover of the user interface and the screw (number 1) of the side panel to separate
the front sheet metal from the side panel (Detail A).
3. Unscrew in sequence the screws (number 5; 6;7) in order to move the front panel slightly forward and to be able to reach the screw (num-
ber 8) visible in detail B.
4. Uncrew the screws (number 8; 9 visible in detail B) and those on the coil side of the unit. To remove the side panel, pull it upwards (to free
the tab at the base) and remove it.
5.6.2 Mod. i-32V5 10 / 10T / 12 / SL12 / 12T /SL12T
1. Remove the cover by undoing the screws (number 1; 2; 3; 4; 5; 6; 7; 8).
2. Undo the screws (number 9; 10) of the front sheet and then push the panel downwards to remove the tabs (Detail A); pull the panel for-
ward to remove it.
3. Undo the screws (number 11; 12;13) and those on the coil side of the unit. To remove the side panel, pull it upwards (to free the tab at
the base) and remove it
5.6.3 Mod. i-32V5 14 / 14T / 16 / SL16 / 16T /SL16T / 18T
1. Remove the cover by undoing the screws (number 1; 2; 3; 4; 5; 6; 7; 8;9).
2. Undo the screws (number 10; 11) of the front sheet and then push the panel downwards to remove the tabs (Detail A); pull the panel
forward to remove it.
3. Undo the screw (number 12) and those on the coil side of the unit. To remove the side panel, pull it upwards (to free the tab at the base)
and remove it.
