34
¾
To re-pair the aircraft and the remote controller
1.
Turn off the remote controller.
2.
Turn on the aircraft.
3.
Press and hold the RC Pairing Button on the aircraft for
about 3 seconds, the pairing indicator beside the RC
Pairing Button will flash slowly in green light, indicating
the aircraft is ready to re-pair.
4.
Push and hold the left command stick leftward while
pressing and holding the Power Button on the remote
controller for a few seconds, the pairing indicator will
change from slow flashing light to quick flashing light
when pairing is successful.
3.3 Preparing Mobile Device
By connecting your mobile device to the X-Star WiFi network, the
X-Star Mobile App configures the device to perform as a FPV monitor
and a ground station for remote piloting, flight configuration and
waypoint navigation, etc.
The X-Star mobile application works on either iOS or Android smart
phones. It can be downloaded from the official website, google play,
apple store or by scanning the QR code shown on the package.
Supported system:
A. iOS6.1 or later
B. Android 4.0 or later
