42
2.
Hold the aircraft horizontally and revolve for 360
q
around.
The rear LEDs on the aircraft will change into solid green
lights when this is done successfully.
Figure 4-1
Horizontal Calibration
3.
Hold the aircraft vertically with the nose down and rotate for
360
q
around. The LEDs on the aircraft will display normally
in correspondence to the current flight mode when calibration
is completed successfully.
Figure 4-2
Vertical Calibration
NOTE:
If the calibration is unsuccessful, the LEDs on the aircraft
will flash yellow lights again. In this case, repeat the above steps
to try again.
Nose Down
