48
¾
To manually land the aircraft and shut down the motors
1.
Maneuver the aircraft to the desired position for landing.
2.
Release the command sticks when the aircraft reaches
the target position to let it hover.
3.
Push the Throttle down slightly and gently to land the
aircraft.
4.
When the aircraft has properly landed, operate with one
of the command methods below to shut off the motors:
A.
Push the Throttle to the bottom position and hold
for 3 seconds, until the 4 motors stop spinning.
This simple method is recommended for
beginners.
B.
Push and hold both the Command Sticks to their
bottom corners simultaneously, either toe-in or
toe-out, for a few seconds to stop the motors
(
Figure 4-3
).
5.
Release the stick(s) gently and simultaneously after the
motors have stopped spinning.
z
Automatic landing
The Landing Button on the remote controller allows pilots to land
the aircraft automatically from where it is hovering (i.e. land onsite),
with one single click, without worries of controlling the flight
attitudes.
¾
To auto land the aircraft using the Landing Button
1.
Maneuver the aircraft to the desired position for landing.
2.
Release the command sticks when the aircraft reaches
the target position to let it hover.
3.
Press and hold the Landing Button for 3 seconds until a
beep sound is heard.
4.
Wait about 3 seconds and the aircraft will start to
descend and land automatically.
