51
NOTE:
For safety reasons, if the aircraft is hovering at the altitude
lower than 30 meters when the Go Home function is activated, it
will ascend to the 30-meter altitude before starting to return.
To manually regain control of the aircraft during the activated Go
Home procedure, take one of the methods below:
A.
When Go Home is activated manually
Toggle the Smart Control Switch from Go Home position to
the other positions to regain control.
B.
When Go Home is activated by Failsafe
There are 2 ways to regain control:
1.
Press and hold the Take-off button on the remote
controller for 3 seconds. A brief beep sound can be
heard when the command has been sent successfully.
Move the command sticks to control the aircraft; if the
aircraft reacts correspondingly, the communication is
recovered.
2.
Push the Throttle upward to the position of 60% in range,
i.e. slightly above the middle point (
Figure 4-8
), and
hold for 2 seconds. In this case, the aircraft may fly
upward slightly when the remote controller control is
recovered.
Figure 4-8
Push the Throttle Upward (60% in range)
0%
60%
100%
