72
The table below describes the respective aircraft
movements reacting to the movements of the command
sticks.
Table 4-7
Controls of the Command Sticks
Command Stick Movement
Aircraft Movement
Throttle Up/Down
Ascend/Descend
Rudder Left/Right
Yaw Left/Right
Elevator Up/Down
Forward/Backward
Aileron Left/Right
Left/Right
2)
Command Sticks Calibration
There are 4 channels in total for command sticks
calibration. They are A, E, T and R channels,
representing Aileron, Elevator, Throttle and Rudder
respectively. Before calibration, make sure your
desired transmitter mode has been selected.
¾
To calibrate the command sticks:
1.
Turn on the remote controller and then the aircraft.
2.
Connect your mobile device to the X-Star Wi-Fi
Network.
3.
Launch the X-Star App on your mobile device.
4.
Tap the
Configuration
icon on the main menu.
5.
Tap the
Remote Controller
option.
6.
Select your preferred transmitter mode and
familiarize yourself with the controls of the sticks.
7.
Rotate the sticks in a circular pattern by their
maximum ranges several times and then back to the
middle position. You can do both sticks at a time or
one at a time.
