4-32
MENU DESCRIPTIONS
www.maxcessintl.com
FIFE-500-XL
MI 2-267 1 D
CONTROL OPTIONS
This menu provides the controls used to limit
operation modes, sensor modes, and system guide point shift controls on
the Operator Level screen.
Navigation:
MANUAL
SETUP
Page forward
CONTROL OPTIONS
Mode Enable – These checkboxes enable or disable use of automatic, servo-
center, and manual operation modes. A “checked” box indicates the mode is
available. When a mode is disabled, its corresponding button on the
Operator Level screen is removed. At least one mode must remain enabled at
all times. The menu will not permit saving a configuration with all
checkboxes cleared.
Jog Enable – These three checkboxes enable or disable jog operations in
automatic, servo-center, and manual operation modes. A “checked” box
indicates jogs are permitted. When jogs are disabled, the jog buttons on the
Operator Level screen are unavailable.
GP Enable – These checkboxes enable or disable the system guide point
controls on the Operator Level screen in automatic, servo-center, and
manual operation modes. A “checked” box indicates guide point controls are
enabled. When disabled, the guide point controls on the Operator Level
screen will be unavailable. This control does not affect guide point control
from the digital inputs.
(
continued
)
Sensor Enable – These controls configure which sensor modes can be
