CDP-01 to D-MAXE 2 Upgrade Kit
Cable Connection Reference
www.maxcessintl.com
Retrofit CDP-01 to D-MAXE 2
MI 1-933 1
Page 1 of 2
Before disconnecting or connecting any cables, ensure that power is off to the
CDP-01 and the D-MAXE components.
Complete safety instructions can be found in the D-MAXE Operating Instructions.
D-MAXE 2 Upgrade kit part numbers
This document is intended to be used as a
quick reference guide for connecting your
existing peripherals to the D-MAXE drop-in
module.
The kit is designed to be installed using the
same mounting holes and hardware as your
CDP-01.
Use Fife power cable (1). Ensure that the
cable retainer clip is properly engaged.
See the D-MAX OI-TS Quick Start Guide (2)
for an introduction to the user interface.
Standard software
290002902
Custom software
290002905
(1) Fife Part No.
78234-000 [length as specified]
78234-001 [16 feet]
(2) Fife Part No. MI 1 5013
Dimensions (D-MAXE 2 kit)
