ME-KS01M48-A
4
Maxell Seiki, Ltd.
4. Operating instructions
This section explains the operation of the RW. Install a device driver and an application
before using the RW. Regarding how to install and how to operate an application, read an
application manual.
1) Turn the power on. When turning the power on, the switch of power shines in green.
2) Launch an application after confirming that the PC has recognized a device driver.
3) Set a rack including microtubes on the antenna of RW.
Advice
Don’t push the antenna of RW. It may cause a breakdown.
4) Transfers data between microtube and RW to by operating an application.
Advice
Don’t bring a device emitting a strong electric wave such as the cellular phone nearer
to the RW. It may cause a communication error.
5) After the completion of operation, turn the power off. When turning the power off, the
switch of power turns off the lights. When not in use, unplug the power cable from the
electric outlet.
