background image

English

   - 2 -

• 

Please place the product in a position that electric 

cables cannot be affected by the operations on the 

product.

• 

Follow all warnings and instructions marked on the 

product.

• 

Follow the on screen instructions for operating the 

related features.

• To prevent the risk of fire or electric shock, please 

do not overuse the plugs and extension cords. 

Please do not open the lid of the monitor to service 

yourself. If the required service needs are not met 

by an authorized service, dangerous voltage and 

other risks may occur.

• 

If you will not use the product for a long period of 

time, unplug the power cord from the mains.

• 

Put the product on a well-ventilated place and 

prevent from bright light, overheat and damp.

• 

The product should be kept in 0 C° - 40 C°. 

Otherwise,  the  appliance  may  be  damaged 

permanently.

• 

Plug the appliance to a grounded outlet. Always use 

the grounded power cord supplied with your product. 

Manufacturer is not responsible for any damage 

caused unearthed usage.

• 

The socket-outlet shall be installed near the 

equipment and shall be easily accessible.

• 

Do not stay in contact with the parts of the product 

that become hot for long periods of time. Doing so 

may result in low-temperature burns.

• 

The LCD panel used in this product is made of glass. 

Therefore, it can break when the product is dropped 

or applied with impact. Be careful not to be injured by 

broken glass pieces in case the LCD panel breaks.

• 

Usage of the monitor must not be accompanied 

by  fatal  risks  or  dangers  that,  could  lead  directly 

to death, personal injury, severe physical damage 

or other loss, including nuclear reaction control in 

nuclear  facility,  medical  life  support  system,  and 

missile launch control in a weapon system.

• 

Do not expose the product to direct sunlight or do 

not place open flames such as lit candles on the top 

of or near the product.

• 

Do not place any heat sources such as electric 

heaters, radiators, etc. near the product.

• In order to prevent a potential electrical shock, in 

extreme weather (storms, lightning) disconnect the 

product from the mains.

• 

Do not touch the controls other than those described 

in the operating instructions. Improper adjustment of 

controls not described in the instructions can cause 

damage, which often requires extensive adjustment 

work by a qualified technician.

Important Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT 

REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.

Please read these instructions fully 

and carefully before use and keep for 

future reference

WARNING: This device is not intended for 

use by persons (including children) without 

physical, sensory or mental capabilities, or lack 

of experience and/or knowledge unless they have 

been given supervision or instruction concerning 

use of the device by a person responsible for 

their safety.

• 

This product is for indoor use only.

• 

Use this product at an altitude of less than 2000 

meters above the sea level and in dry locations and 

in regions with moderate or tropical climates.

• 

Please keep this manual for further use.

• 

Unplug your product before starting to clean. Do 

not clean the product when it is on. Do not use 

liquid or aerosol cleaners. Use a damp cloth for 

cleaning.  If  that  does  not  help,  please  use  LCD 

display cleansers.  Do not apply the cleaner directly 

on the product.

• To  prevent  breakdown,  do  not  use  non-advised 

accessories.

• Please do not place your product near wash basins, 

sinks, water pans, pools etc.

• 

Do not expose the product to dripping or splashing 

of liquids and do not place objects filled with liquids, 

such as vases, cups, etc. on or over the product 

(e.g., on shelves above the unit).

• 

Please leave at least 5 cm of free space between the 

product and walls or other furnitures for ventilation 

purposes.

• That  product  can  only  be  started  by  the  defined 

power source on its rating plate. For further 

information, please contact with your dealer.

• As a safety precaution, a three-wired grounding plug 

is given with the product. As a safety precaution, 

please do not make any change on the grounding 

plug. Always use earthed socket outlet for product.

• 

Please provide the plug and socket to supply the 

needed power for appliance.

Summary of Contents for MA-7510BK
















































Reviews: