CONTENT
MAX-IVY
AUDIO·PHOTO·VIDEO-PLAYER
CONNECTIONs
Connect Earphones
Firmly plug the earphones into the appropriate jack on the bottom part of the player.
PlEasE NOTE!
unplug earphones before connecting your player to your Pc via usB cable.
Connect USB
1. Position the Pc in a way that its usB ports can be easily accessed. (note: the usB port(s) on
your Pc may be found on the front panel instead of the back panel.)
2. use the provided usB cable to connect the usB ports of both, player and Pc.
3. the Pc system detects new hardware and starts to install the driver automatically, if needed.
Wait for the system to finish the installation.
4. When it has finished, double-click on “my computer” on the desktop.
5. a new mtP Player will appear in the “my computer” window when using Windows xP or
above, in case media
®
Player 10 is installed. using other operating systems, a new
removable disk will appear in the “my computer” window. the new disk icon stands for the
player’s built-in memory. now you can download your files to the player.
HOW TO cHEck THE usB drivEr WiNdOWs 98 sE/ME:
control Panel > system > device manager
ChargINg ThE baTTEry
—
use the usB cable to connect max-Ivy to a Pc, or the power adaptor to connect it to the mains supply.
—
Wait until a battery icon motion appears in the top right corner of the player‘s display.
—
the built-in li-Ion battery is now charging.
—
the battery is fully charged when battery icon motion stops, and you see a full icon.
—
the first battery charge will take about 4 hours. For further recharges 2 to 3 hours will do.
PlEasE NOTE:
—
make sure that the battery is fully charged before first use.
—
Please recharge the battery when there is a message that battery voltage is low and the player shuts down.
—
Please fully charge the battery every 2 - 3 months when the player is not used for a long time. otherwise, the battery
voltage may be too low to turn the player on.
