You MUST Review
Your Vehicle
Owner’s Manual
Your vehicle owner’s
manual will let you know
which vehicle belts and
seating positions car
seats can be installed in.
1
Your vehicle’s features may be considerably different
than those pictured here.
If LATCH: lower anchors are not an option or if your child weighs more
than
25 lb
(11 kg), you
MUST
use the vehicle seat belt system to install
the car seat.
Not all vehicle belts and seating positions will work with car
seats. Please go through the following steps to understand how
to lock a car seat in
Rear-Facing Mode
or
Forward-Facing Mode
with a vehicle belt.
The vehicle belt
MUST
NOT
loosen after
tightening.
This means there needs
to be a way to lock the
vehicle belt.
Check Retractor
Retractors pull seat belts
into stored positions
and lock the belt to hold
passengers in place.
Vehicle Belts
55
56
Check How This
Car Seat Will Be
Locked Into Place
continued on next page
2
The ways this can be done are:
• By using the seat belt’s retractor (see step 3);
OR
• By using the seat belt’s latch plate (see step 4).
4
3
See the next page for some common types of
vehicle belt retractors that will work with this car
seat.
Lock Off
When used correctly,
this base’s Lock Off will
lock the vehicle belt.
Please go to the vehicle belt with base installation
section of the manual to see how to properly use
this feature.
Base Install with Vehicle Belt:
Page 5
