background image

51

Baby Capsule 

I

 

Maxi-Cosi

 

I

 

Handle adjustment 

The handle has three positions of 
adjustment, the carry position, the 
retracted position and the anti-rock 
position. The carry position is used 
to transport the capsule between 
environments, the retracted position is 
optional - designed to make removing 
the child easier for the parent and the 
anti-rock position is used to stabilise 
the capsule when on a flat surface – 
preventing it from rocking.

1. To adjust the capsule carry handle, 

first position both hands around the 
connected pivot points marked by 
the Maxi Cosi logo and position your 
thumbs on top of the grey activation 
buttons.

2. Simultaneously push down on 

both the left and righthand side 
buttons together and push or pull 
the handle in the desired direction of 
adjustment.

3. When the desired position is reach, 

release the buttons and continue to 
rotate the handle until the buttons 
‘click’ into position to lock the 
handle.

Note

: The handle’s rotational 

adjustment is restricted between 
the first and third position so do 
not attempt to adjust beyond these 
positions.

Carrier Operation and Adjustment

CH

IL

D

 F

ITM

EN

T

Summary of Contents for Mico 12





































































Reviews: