E-1
Rear-Facing Installation with Base
LATCH Belt
Lap Belt
Lap/Shoulder Belt
E. Installing Rear-Facing
Never place a child rear-facing
in a seating position with an
active frontal airbag. This can
result in serious injury or death.
This base must always face the rear of
the vehicle when installed.
E-2
Preparing to Install Base
with LATCH
Remove LATCH
from Storage
To use LATCH, unhook
LATCH connectors
from base by pressing
the red release button
on each connector.
1.
Thread the LATCH belt
through belt path as
shown.
NOTE:
Adjuster
MUST
be on the left side of
base as shown. Do Not
twist belt.
2.
23
24