10
Locking the swivel wheels
1.
Press the swivel lock on the wheel down and turn the
front wheel to the rear position until you hear a 'click'
(Fig. 19).
2.
To release the lock lift up the swivel lock.
Sun canopy
When using the Maxi-Cosi Mura with the seat in the forward-
facing position:
1.
Attaching: slide the sun canopy onto the frame until it
can go no further (Fig. 20). When using the Maxi-Cosi
Mura in the semi-reclining and reclining positions you can
use an extra flap on the sun canopy. Remove the flap
from its storage compartment (Fig. 21), close the canopy
using the zips and pull the flap tight using the stopper
(Fig. 22).
2.
When using the Maxi-Cosi Mura seat in the semi-
reclining and reclining positions secure the sun canopy
using the buttonhole. In addition, secure the sun canopy
using the press studs on the side of the seat (Fig. 23).
3.
Removing: loosen the sun canopy using the buttonhole
and press studs (Fig. 24). Slide the sun canopy to the top
of the frame (Fig. 25).
-
Note:
when turning the seat around you have to turn the
sun canopy around also.
When using the Maxi-Cosi Mura with the seat in the
backward-facing position, the sun canopy should be secured
using only the press studs and not using the buttonhole
(Fig. 26).
Basket
1.
The basket can be used for shopping up to a maximum of
5 kg (Fig. 27).
2.
You can attach and remove the basket using the press
studs, hooks and elastics (on the bottom of the Maxi-Cosi
Mura).
-
Note:
do not exceed the maximum permitted weight of
5 kg!
4.2 Folding and disassembling
Folding
1.
If you want to fold the Maxi-Cosi Mura with the seat still
attached, this is only possible when the seat is attached
in the forward-facing position and the back rest is in the
extreme forward position (Fig. 28).
-
We recommend that the seat is always removed before
starting to fold the pushchair.
2.
Fold back the sun canopy parallel to the handlebar
(Fig. 29).
3.
Turn the fold safety lock on the right side downwards and
then simultaneously pull the folding-up release buttons
on both sides upwards (Fig. 30).
4.
Tilt the handlebar forwards and then down until it ‘clicks'
into the transport lock (Fig. 31).
If you want to fold the frame even smaller
5.
Remove the seat before starting folding.
6.
Turn the front wheel forward.
7.
Press the release button (Fig. 32).
8.
The frame folds even smaller.
9.
Remove the wheels if necessary.
Removing the wheels
1.
Rear wheels: press on the centre of the hubcap and at the
same time pull the rear wheels out of the frame (Fig. 33).
2.
Front wheel: press in the release button and pull the front
fork out of the frame (Fig. 34).
English
EXI0218_Mura_3_I_BW.qxd:- 16-12-2008 16:36 Pagina 10
