17
5. Follow the wizard instructions on the screen and click
Next
to
continue.
6. Click on
Install
and the printer driver program will be installed onto
the computer.
7. Click on
Finish
to complete the whole installation procedure.
NOTE
The MaxiSys Printer runs automatically after the installation.
Printing Operation
This section describes how to receive file from the Display Tablet and
perform printing through the computer:
To perform printing through the computer
1. Install the printer driver to the computer.
2. Before printing make sure the Display Tablet is connected to the
computer network, either via WiFi or LAN. See
on
page 94
3. Run the MaxiSys Printer program on the computer to open up the
printer interface.
4. Click
Test Print
to make sure the printer is working successfully.
5. Tap the
button on the toolbar. A temporary document will be
created and sent to the computer for printing.
6. The MaxiSys Printer will print the received document automatically
when the
Auto Print
option is selected.
7. If you need to print the document later, click
Open PDF
file and
select the document, and double click the
button on the
MaxiSys Printer interface to start the printing.
NOTE
Make sure the computer installed with the Printing Driver program is
connected to a printer.
