30
When a user-response is not required to continue, the message displays
briefly before automatically disappearing.
Warning Messages
This type of messages informs you when completing the selected action may
result in an irreversible change or loss of data. The typical example for this is
the
“Erase Codes” message.
Error Messages
Error messages inform you when a system or procedural error has occurred.
Examples of possible errors include a disconnection or communication
interruption due to certain reasons.
Making Selections
The Diagnostics application is a menu driven program that presents a series
of choices one at a time. As you select from a menu, the next menu in the
series displays. Each selection narrows the focus and leads to the desired
test. Use your fingertip to make menu selections.
Diagnosis
The Diagnostics application allows you to establish a data link to the
electronic control system of the test vehicle for vehicle diagnosis or service.
You can operate functional tests, retrieve vehicle diagnostic information such
as trouble codes, event codes and live data for various vehicle control
systems, such as engine, transmission, ABS, and more.
There are two options available when accessing the Diagnosis section:
1. Auto Scan
– starts auto scanning for all the available systems on the
vehicle.
2. Control Units
– displays a selection menu of all available control units
of the test vehicle.
After a section is selected and the tablet establishes communication with the
vehicle via the VCI device, the corresponding function menu or selection
menu displays.
