32
-?-
: Indicates that the vehicle control system has been detected,
but the tester cannot accurately locate it.
Fault | #
: Indicates there is/are detected fault code(s) present;
“#” indicates the number of the detected faults.
Pass | No Fault
: Indicates the system has passed the scanning
process and no fault has been detected.
Tap the
○
>
button to the right of the system item, on which you
want to perform further diagnosis and other test activities. A
Function Menu screen
shall then display.
Functional Buttons
The table below provides a brief description of the Functional
Buttons
’ operations in Auto Scan:
Table 0-3
Functional Buttons in Auto Scan
Name
Description
ESC
Returns to the previous screen or exit Auto Scan.
Pause
Suspends scanning and changes to show the
Continue
button.
OK
Confirms the test result, and continues to the system
diagnosis after selecting the required system by tapping
the item in the Main Section.
Quick
Erase
Deletes codes. A warning message screen will display to
inform you of possible data loss when this function is
selected.
Report
Displays the diagnostic data in the report form.
