38
Value Column
– displays the values of the parameter items.
Unit Column
– displays the unit for the parameters.
To change the unit mode, tap the
Setting
button on the top
toolbar and select a required mode. See
on page 93 for
more information.
4.
Display Mode
There are 4 types of display modes available for data viewing, allowing
you to view various types of parameters in the most suitable way.
Tapping the drop-down button on the right side of the parameter name
opens a submenu. There are 4 buttons to configure the data display
mode, and one Help button on the right that you can tap for additional
information.
Each parameter item displays the selected mode independently.
Analog Gauge Mode
– displays the parameters in form of an analog
meter graph.
Text Mode
– this is the default mode which displays the parameters in
texts and shows in list format.
NOTE
Reading of status parameters, such as a switch reading, which are mostly in
word form, like ON, OFF, ACTIVE, and ABORT, etc., can only be displayed
in Text Mode. Whereas reading of value parameters, such as a sensor
reading, can be displayed in text mode and other graph modes.
Waveform Graph Mode
– displays the parameters in waveform graphs
When this mode is applied, three control buttons will appear on the right
side of the parameter item, allowing you to manipulate the display status.
Text Button
– resumes Text Display Mode.
Scale Button
– changes the scale values, which are displayed
below the waveform graph. There are 3 scales available: x1, x2,
x4 and x8.
Zoom-in Button
– tap once to display the selected data graph
in full screen.