67
DPF Regeneration Service
The Diesel Particulate Filter service function performs the regeneration
procedure which is the DPF cleaning operation to clear the blockage through
continuous burning of the particulate matter captured in the DPF filter. If the
DPF light on the vehicle comes on and you successfully complete a DPF
regeneration cycle, you will notice that the DPF light will automatically turn
off.
Tire Pressure Monitor System (TPMS) Service
This function allows you to quickly look up the tire sensor IDs from the
vehicle
’s ECU, as well as to perform TPMS replacement and sensor test.
Take Tire pressure sensor replacement (Front left wheel sensor) as an
example.
NOTE
During this application the wheel unit 8 digit identifications will need to be
entered using the screens provided.
The sensor identifications can be accessed by reading directly from the wheel
unit or by using the identification reading tool.
On completion, a specific road test will be required followed by the tire
pressure monitor system application.
