MAX32600 User’s Guide
Analog Front End
8.3 ADC
• bits 3:0 - mux_ch_sel setting
• bits 5:4 - pga_gain setting
• bit 6 - mux_diff setting
• bit 7 - Not used, should be set to 0
Note
ADC unipolar/bipolar mode and bipolar range must be the same for all channels.
ADCCFG_SCAN1.adc_scan1
Field
Bits
Default
Access
Description
adc_scan1
15:8
00h
R/W
ADC Scan Configuration - Channel 1
• bits 3:0 - mux_ch_sel setting
• bits 5:4 - pga_gain setting
• bit 6 - mux_diff setting
• bit 7 - Not used, should be set to 0
Note
ADC unipolar/bipolar mode and bipolar range must be the same for all channels.
ADCCFG_SCAN1.adc_scan2
Field
Bits
Default
Access
Description
adc_scan2
23:16
00h
R/W
ADC Scan Configuration - Channel 2
• bits 3:0 - mux_ch_sel setting
• bits 5:4 - pga_gain setting
• bit 6 - mux_diff setting
Rev.1.3 April 2015
Maxim Integrated
Page 446