HOW TO TOAST
1. Turn the function control knob to
TOAST
.
2. Place food to be toasted onto the wire rack.
3.
Turn the timer control knob to “OFF”.
4. Bell will ring to signal the end of the toast cycle.
Note
: Wire rack should be positioned in the middle of the oven with the indentations pointing
down.
CARE AND CLEANING
Any spattering that occurs whilst cooking and comes into contact with the continuous coating
is oxidized while the oven is in operation. If desired, wipe the walls with a damp sponge,
cloth or nylon scouring pad and mild detergent.
All accessories should be washed in warm soapy water. The door can be cleaned with a
damp sponge and wiped dry with paper towel or a cloth. Clean the outside with a damp
sponge.
WARNING: BE SURE TO UNPLUG THE OVEN AND ALLOW IT TO COOL BEFORE CLEANING
CAUTION: WHEN SLIDING TRAYS OUT OF OVEN, ALWAYS SUPPORT THE RACK.
DO NOT LET GO UNTIL YOU ARE SURE THE RACK IS HELD SECURELY.
NOTE: DO NOT USE STEEL WOOL SCOURING PADS, ABRASIVE CLEANERS, OR
SCRAPE THE WALLS WITH METAL UNTENSILS, AS ALL OF THESE METHODS MAY
DAMAGE THE CONTINUOUS CLEAN COATING.
NOTE:
DO NOT USE AN ABRASIVE CLEANER AS IT MAY DAMAGE THE EXTERIOR
FINISH.
DO NOT USE AN ABRASIVE CLEANER OR STEEL WOOL SCOURING PAD ON
THE DRIP PAN AS IT MAY DAMAGE THE PORCELAIN ENAMEL FINISH.
LET ALL PARTS AND SURFACES DRY THOROUGHLY PRIOR TO PLUGGING
OVEN IN AND USING.
