Spangenberg International B.V. – Rendementsweg 24P – 3641 SL Mijdrecht – Holland – T. +31 (0) 297 253969 – F. +31 (0) 297 256445
info@spangenberg.nl
–
www.spangenberg.nl
Operation
•
Take the inner basket out of the glass cylinder and remove the cylinder.
•
When the two parts are removed, you can remove the plate with holes. Underneath the
plate water should be poured. (The water level may not be higher than the plate.)
•
Warning! Make sure that the water level is sufficient at all times.
•
Warning! Pay attention not to burn yourself at the appliance while controlling the water
level, always use protecting material.
•
Plug the appliance into the main socket to start the appliance. The green indicator will
start burning.
•
To start the appliance, turn the ‘on/off’ switch. The green indicator will start burning.
•
To start the part where the bread is heated, turn the ‘on/off’ switch placed on the bottom
in front of the pipes. (Hot Dog 2)
•
Use the temperature switch at the front the appliance to achieve the desired temperature.
To preheat the appliance turn the switch to ‘max’.
•
When the appliance is not being used, turn off the appliance by turning the ‘on/off’ switch.
•
When the appliance is not being used for a longer time, please remove the plug from the
main socket.
•
We advice you to clean the appliance daily.
Cleaning and maintenance
•
Always remove the plug from the socket before any cleaning or maintenance is being
done to the appliance.
•
Warning! Let the appliance cool down before any cleaning or maintenance is being done
to the appliance.
•
Warning! Do not use any aggressive detergents or scourers, which may cause
scratches. Do not use gasoline containing or solvents while cleaning. Make sure no water
enters the appliance.
•
Clean the of the appliance with a damp cloth (water with mild detergent). Dry the
appliance after cleaning.
