Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Installation
1.
The machine must be positioned on a flat and stable surface.
2.
Choose a surface where the machine is not exposed to direct sunlight, or close to a direct source of heat
such as a cooker, oven or radiator.
3.
When positioning the appliance, maintain a distance of 10cm (4 inches) between the appliance and walls or
other objects for ventilation and ease of use.
4.
Attach and fix the appliance to a table, bar or countertop using the clamp. The thickness must be between
15 and 80 mm.
5.
The LED lights are battery powered. To gain access to the battery holder, remove the black plastic top cover.
Gently lift the battery holder and place batteries inside. When doing so, make sure not to disconnect the
power cables. Return the battery holder back inside and place the cover back on top.
6.
Connect the gas hose to a liquid CO2 gas cylinder with a CGA320 valve. A cylinder with siphon tube is
recommended. If a standard cylinder is used, the cylinder must be placed upside down to deliver the liquid
CO2 properly.
