background image

12

1. HANDLE WITH HOSE

A. Plug.
B. Hose.
C. Handle.
d. Steam push button.
e. Suction push button.

MAINTENANCE OF THE HOSE

After every use we recommend rinsing the hose by sucking 
one/two litres of water from a basin to prevent the dirt from 
settling on the internal walls. Then, hook it, so that it can get 
dry.

2. MULTIFUNCTION BRUSH
It is equipped by an articulation which allows it to turn 360°. 
This brush can clean areas difficult to be reached (under the 
furniture and the beds, on high cupboards, etc.) and various 
kind of floor, carpets, etc.
To use the desired fitting on the brush, just insert it and by 
keeping it pressed, move the orange sliders inwards (fig. 2). 
To remove the fitting, move the sliders outwards.

2A. FITTING FOR LIQUID SUCTION
It is fitted to clean floors, plastic coatings, marble, etc..
Steam the surface to be cleaned and then suck; the result is a 
perfectly clean and dry surface. 

2B. FITTING FOR CARPETS
The rounded shape allows sliding and cleaning carpets and 
fitted carpets more easily.

2C. UNIVERSAL FITTING
It can be used as vacuum cleaner on floors, tiles, plastic 
coatings.

aperto

aperto

chiuso

chiuso

2B

2C

2A

2

d

A

B

e

C

Summary of Contents for ATHENA 6

























Reviews: