12
SprayMate HVLP ST610 TNT
US
Malfunction
Cause
Remedy
Atomization too
coarse
•
Material volume setting
turned too far clockwise
•
Nozzle contaminated
•
Too little pressure build-up in
container
•
Air filter heavily soiled
➞
Turn material volume
setting anticlockwise
➞
Clean
➞
Tighten container
➞
Replace
Uneven spray
pattern
•
Spray tanning solution in the
container is running out
•
Nozzle seal worn
•
Air filter heavily soiled
➞
Refill
➞
Replace
➞
Replace
Excessive overspray
•
Distance too large
•
Material volume setting
turned too far clockwise
➞
Reduce distance
➞
Turn material volume
setting anticlockwise
Spray tanning
solution runs down
body
•
Too much spray tanning
solution applied
•
Spray paths overlap too much
•
Spraying distance too small or
spray movement too slow
➞
Carefully dab affected
points with a towel,
reduce flow setting if
required and lightly
overspray again
Technical Data
Power source:
120 V ~, 60 Hz
Current:
2.3 A
Protection class:
I
Sound pressure level
81 dB (A); Uncertainty K
= 4 dB
Sound pressure output
94 dB (A); Uncertainty K
= 4 dB
Oscillation level
< 8.2 ft/s²; Uncertainty K = 4.9 ft/s²
Air hose length:
11.5 ft
Container capacity:
6.75 fl. oz
Weight:
approx. 3.5 lbs
Environmental protection
The appliance and accessories should be recycled in an environmentally
friendly way. Do not dispose of the appliance with household waste. Support
environmental protection by taking the appliance to a local collection point or
obtain information from a specialist retailer.
