background image

13

SprayMate HVLP ST610 TNT

US

MaxiMist™ 

12 Month Limited warranty 

1 Year Turbine Motor warranty

This machine and equipment is guaranteed by MaxiMist Tanning Systems for a total 

period of TWELVE MONTHS from the ORIGINAL date of purchase by the ORIGINAL 

PURCHASER. Proof of purchase to be included and all SHIPPING CHARGES on 

returns are to be pre-paid. Client is responsible for shipping both the return and the 

replacement unit.
MaxiMist Tanning Systems upon examination of the machine/equipment will replace or 

repair at their discretion any defects in material or workmanship.
This WARRANTY does NOT include: misuse, damage, neglect, alterations, disassembled 

equipment or modifications, lack of maintenance, cleaning, water damage to electrical 

parts and INCORRECT VOLTAGE CONNECTION. This WARRANTY is in lieu of all other 

express warranties, any WARRANTY implied by law, including but not limited to implied 

warranties of merchantability or fitness, is excluded to the maximum extent permitted 

by law and, if not excludable, it is limited to the duration of the express warranty. No 

representative or person is authorised to extend this warranty or to create for MaxiMist 

Tanning Systems any other liability in connection with the sale of any MaxiMist Tanning 

Systems product. MaxiMist Tanning Systems shall not be liable for any consequential, 

incidental, or special damages of any kind directly or indirectly resulting from breach of 

any express or implied warranty. 
Some States do allow the exclusion of limitation of incidental or consequential 

damages or limitations on the length of any warranty so that the above limitations and 

exclusions may not apply to you; however, to the maximum extent permitted under 

applicable law, the only rights and remedies shall be to obtain a replacement for any 

defective product. This warranty gives you specific legal rights and you may also have 

other rights.

What’s covered?

1. The turbine motor for 12 months.
2. The power switch on the turbine unit.
3. Leaking container and spray guns.

PLEASE CONTACT YOUR DEALER FOR ALL WARRANTY AND 

SUPPORT ISSUES

Summary of Contents for SprayMate TNT HVLP ST610

















Reviews: