5
SprayMate HVLP ST610 TNT
US
6. Preparation of the spray area
•
Remove all objects from the spray area if possible, to avoid contamination from
overspray.
•
Work in a room with a smooth, easy-to-clean surface.
The use of a spray booth/spray tent and tanning extraction fan is recommended.
7.
General preparations before the application of spray
tanning solution
i
Test the compatibility of the spray tanning solution on a small patch of skin
approx. 24 hours before the actual application. Stop application if skin irritation
occurs.
•
Approx. 24-48 hours prior to treatment remove body hair by shaving or waxing.
•
Do not apply any perfume, deodorant or make-up. These products can negatively
influence the tanning result.
•
On the day of the treatment wear dark, loose-fitting clothing, in order to prevent
discoloration of clothing by the spray tanning solution.
•
Remove all jewelry, in order to avoid discoloration by the spray tanning solution.
8. Preparation of the skin
i
Correct preparation of the skin is key to an even and long lasting tanning result.
Please note the following instructions:
•
Remove all dead skin cells by means of exfoliation before applying the spray tanning
solution.
•
Make sure that the moisture content of the skin is as uniform as possible.
Use barrier cream for dry areas (e.g. elbows and knees). Let the moisturizer dry before
commencing the treatment.
•
Apply a little barrier cream to lips, nails, palms of the hands, eyebrows and the hairline
for protection.
9. Start-up
Before connecting to the power supply, be sure that the supply voltage is identical with
the value given on the rating plate.
1. Unscrew the container from the spray attachment.
2. Prepare spray tanning solution according to manufacturer's instructions and pour
into the container.
3. Screw the container firmly onto the spray attachment.
