17
Verify that the switch is in the ‘O’
OFF position before plugging the
power cord into the power outlet.
Plug the power cord into the outlet.
Insert the locking end of the
hose into the vacuum port on the
collection tank and lock into place.
Push the required attachment
onto the free end of the hose or
extension wand. To use the round
dust brush and crevice tool with an
extension wand you will be required
to use the metal accessory adaptor.
7
6
DR
Y V
A
CUUM OPER
A
TION
OPERATING INSTRUCTIONS: DRY VACUUMING
Turn the motor on by flipping the
switch to the ‘I’ ON position and
begin vacuuming.
Once you have completed
vacuuming, flip the switch to the ‘O’
OFF position and unplug the power
cord from the outlet.
8
9
O = OFF I = ON
DO NOT USE THE HEPA CARTRIDGE FILTER AND THE MICROFIBRE PRE-
FILTER FOR VACUUMING LIQUIDS.
DO NOT USE THE COLLECTION BAG FOR VACUUMING LIQUIDS.
WARNING:
If filters are contaminated or have been used, they must be disposed of
properly, prior to performing wet vacuuming operations.
CAUTION:
Hazardous materials must be disposed of properly. NEVER throw contaminated
debris in your usual trash receptacle. Place debris in an OSHA approved bag
or container marked with HAZARDOUS MATERIAL warning and dispose in
accordance with your local Hazardous Waste Regulations.
Summary of Contents for 054-0338-0
Page 1: ...30 L 8 U S Gallons HEPA Wet Dry Vacuum 054 0338 0 ...
Page 2: ......
