9
®
model no. 054-7291-6 | contact us 1-888-670-6682
8
Safety alert symbol
To reduce the risk of injury, user must read
operator’s manual.
Always wear breathing protection when
operating this product.
This symbol designates that this tool is
listed by the Intertek Testing Services, to
United States and Canadian Standards.
Class II construction
Following this rule will reduce the risk of serious personal injury.
• Protect your hearing.
Wear hearing protection during extended periods of
operation. Following this rule will reduce the risk of serious personal injury.
• USE PROPER EXTENSION CORD.
Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating. The following table shows the
correct size to use depending on cord length and nameplate ampere rating. If in
doubt, use the next heavier gauge. The smaller the gauge number, the heavier the
cord.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate the
product better and safer.
DOUBLE-INSULATED TOOLS
• To reduce the risk of electric shock, double-insulated tools are equipped with
a polarized plug (one blade is wider than the other). This
plug will fit into a polarized outlet only one way.
If the
plug does not fit into the outlet properly, reverse the plug. If
it still does not fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in any way.
• Double insulation eliminates the need for the three-
wire grounded power cord and grounded power supply
system.
This sander is a double-insulated tool.
S
AFETY GUIDELINES
IMPORT
ANT INFORMA
TION
WARNING!
Use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct
particles away from face and body.
WARNING!
Use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use
face or dust mask if the operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
ANSI Z87.1 eye protection (CAN/CSA Z94.3)
ANSI S12.6 (S3.19) hearing protection
NIOSH/OSHA/MSHA respiratory protection.
WARNING!
Always wear proper personal hearing protection that conforms to ANSI S12.6
(S3.19) during use. Under some conditions and duration of use, noise from
this product may contribute to hearing loss.
WARNING!
For your own safety, read the Instruction Manual
before operating the sander.
WARNING!
Double insulation DOES NOT take the place of normal
safety precautions when operating this tool.
CAUTION!
WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT
PARTS. Repair or replace damaged cords.
WARNING!
Do not permit fingers to touch the terminal or plug when
installing or removing the plug from an outlet.
Ampere rating of the
tool (A)
(120 V circuit only)
Total length of cord
25’ (7.6 m)
50’ (15 m)
100’ (30 m) 150’ (46 m)
More than
Not more
than
Minimum gauge for the extension cord (AWG)
0
6
18
16
16
14
6
10
18
16
14
12
10
12
16
16
14
12
12
16
14
12
Not recommended
• SAVE THESE INSTRUCTIONS.
Refer to them frequently and use them to instruct
others who may use this tool. If someone borrows this tool, make sure he or she has
these instructions also.
V
Volts
A
Amperes
Hz
Hertz
W
Watts
n
0
No-load speed
~
Alternating current
3104259
Summary of Contents for 054-7291-6
Page 1: ......
Page 12: ...model no 054 7291 6 contact us 1 888 670 6682 22 WARRANTY...
Page 13: ......
